Makimus Elektronik - - PA-20 (Auto charger) - PA-20-12-20A (50Ah - 300Ah)

Battery Charger PA-20 series are devices that replaced the previously manufactured by our company, the charger PA-10 series. They are designed for precise and safe charging of all types of motor vehicles. With a sophisticated design, the batteries are safe and can be left unattended user for any length of time. Do not overload the battery, when fully charged, interrupt their work and pass a state monitoring of the connected battery. After his re (partial) discharge, resume their work. The whole process of charging the battery runs completely automatically, which limits the role of the user only to perform the operations associated with connecting devices for loading and selecting the type of batteries and battery charging current (dependent on capacity)

A charger for the batteries of two types:

- The first type are standard rechargeable sealed lead - acid used in motor vehicles powered by combustion engines. They are both battery maintenance (in which the electrolyte level should be checked and if necessary, supplement it through the refill of distilled water) and so. maintenance-free batteries do not require special maintenance.

- The second type are known. a variation of gel batteries battery lead - acid, in which the electrolyte is in the form of a gel. This allows the battery can operate in any position without the risk of leakage. These types of batteries can be found in vehicles powered by electric motors, wheelchairs for disabled persons, electric scooters, caravans, for generator, boats, pontoons, etc.

Through the use of modern equipment in the design of microcontrollers, they have a number of properties not found in most products from other manufacturers. The speech is primarily about:

- The choice of a rechargeable battery. Thus, the unit selects the optimal characteristics of the charge, which prevents damage to the battery and significantly increases its service life.

- Security in terms of reverse polarity of the battery. In this case, the device does not take the charging process.

- Short-circuit security in terms of crocodiles - even long wires shorted output device does not damage it.

- Charging current limit, the value of choosing a switch. This ensures that the deeply discharged battery, the initial phase of charging does not take too much power, could negatively affect its viability.

- Restrictions on the charging voltage, so that the final stage of charging the battery, so-called gassing is limited to a minimum or not occur at all.

- Three gradual thermal protection system, through which there is no damage to the device, even under the most adverse conditions for him.

- Active cooling system (electric fan) has led to significantly improve performance.

- Agreement protecting the battery from overcharging. With it you connect the charger to the battery, we do not interfere with battery charging. After the battery is fully charged, the charging process is automatically interrupted, and the same charger can be disconnected at a later time (without compromising battery life).

- The use of devices called. float.

Below the most important technical information about the product sold:

Charger Model: PA-20-12-20A

Supply Voltage: 230VAC

Power: 312VA

Battery voltage: 12V

Charging current limit (two ranges): 10,0 A / 20.0 A

Recommended battery capacity:

range of I (MIN): 50Ah - 150Ah
range II (MAX): 100Ah-300Ah

Dimensions: Length: 275mm / Width: 180mm / Height (without handle): 105mm

NET Weight: approx 5,0 kg

With the charger you will receive:

- Manual

- Sales slip

- Stamped warranty card, valid for a period of 24 months from the date of sale